Surveying in Tunneling
offer   Item No. : 1160 Item online since: 03-01-2006 print page
Item Single Arm Wall Bracket 14-TK1

Comment Mobile and light bracket for instrument station

Country Germany
City Schwelm

Terms of payment
on request

Very light, easy to transport console of high manufacturing quality for all modern surveying instruments. Since a number of instrument positions are seldom used simultaneously, even on larger construction sites, this system is extremely economical because you only have to install a single wall bolt for every possible position.

The arm of the console is made from very rigid 40 x 60 mm aluminium box section with screw on equipment mounting plate (Ø 140 mm). The instrument is attached to the console with a 5/8" tightening bolt.

On this system, the console is fixed to the wall by means of a solid, low cost brass bolt with protective cap, which is cemented or bonded into the wall. The centring system, which has a position permanence of a few hundredths of a millimetre, is protected by a brass cover when not in use. When measurement is to take place, the cover is screwed off and replaced by a stainless steel adaptor bolt onto which the console is mounted. After the console has been levelled approximately using the circular spirit level integrated into the arm, the clamping screw is firmly tightened. In this way set up is complete in a few seconds.
Since the instrument levelling plate offers only limited possibilities for levelling, the wall bolt must be installed very precisely. For installation we recommend our two-component special mortar and installation device no. 14-TK1-EV with two bubble levels built in at right angles.

Should you wish to use a particularly heavy instrument (heavier than 7 kg), the console can be propped up by an additional support to achieve greater rigidity. A standard bolt from the 11R range (with M8 internal thread) is built into the lower part of the console for this purpose. All necessary components are included in the optionally available support kit.

For convenient transportation of the console, mounting bolt and optionally available support kit we recommend our carry case with foam padding insert cut to suit. In this special case you can store two complete console fittings, 2 support kits, adaptor bolts and the installation device.

Distance from wall to vertical axis of instrument: 490 mm
Console weight (excluding support kit): 2.3 kg
Bore diameter for wall bolts 14-TK1-WB: 22 mm
Shaft length of wall bolts 14-TK1-WB: 90 mm

14-TK1-WA Console for fast changing,
(instrument weight max. 7 kg), with spirit bubble
and 5/8" tightening bolt

14-TK1-TS Additional support with accessories
without wall bolts

14-TK1-TK Special carrying case for 14-TK1 and

14-TK1-EV Installation device with two spirit levels at right
angle for 145-TK1

14-TK1-WB Wall bolt, brass, with protection cap for 14-TK1

14-TK1-AB Adaptor bolt (connection console/wall bolt),
stainless steel

Get in contactHere you can get in touch with the seller via the Please fill in your contact details into the respective fields. The Seller will get a message with your contact details and will get in touch with you eather by email or by phone. Please do not forget to mention your country code. Please double check your email address that you typed in to avoid faulty insertions that may cause interferences in the contacting process.
First name, Last name
Message  - Language: or
I agree to receive information from Tunneltrade in the future
Single Arm Wall Bracket 14-TK1
Single Arm Wall Bracket 14-TK1 Single Arm Wall Bracket 14-TK1 Single Arm Wall Bracket 14-TK1 Single Arm Wall Bracket 14-TK1 Single Arm Wall Bracket 14-TK1
(3966 Kb) 1160.pdf

The advertiser speaks the following languages:

Direct contact
Contact Mr. Goecke
Phone +49 2336 479011
Fax +49 2336 479010
Service Links
> Currency exchange calculator
> Online translation support
> Forwarder
> Machine Certificate
Other offers of this advertiser
Company links

We build for a clean
environment! High quality standard by specialisation in sewage construction, pipe jacking and special underground

MOLL-prd Siphon Intakes
design and planning. Invisible steps to visible success. The right partner to design your specialized projects

Roadheader Specialists
NDCO is a specialist supplier of new, used and refurbished tunneling equipment. Agent for DOSCO.

ALBATROS Engineering
We supply special-purpose solutions in machine-engineering. We construct special machinery according to your needs.

Underground Equipment
Vast Array or Underground Mining and Civil Tunneling equipment. From Roadheaders, Scooptrams, LHD, Conveyors etc

Here your advert could appeare soon!